ProfessionalLarge Drywall Hole Patch

Some holes are past the point where mesh tape and a tub of compound will hold. A kicked-in door, a hard impact, or one repair stacked on another can leave an opening with nothing solid behind it. In older downtown homes with plaster over lath, a large hole behaves differently than one in drywall — we cut back to sound material, add proper backing, and set a patch that holds for good.

Get a Free Estimate See service areas

4.9/5 Fully Insured & Bonded

Licensed

& fully insured

Licensed & Insured Background-Checked Pros 4.9 / 5 Same-Day Service

Upfront pricing

Clear, honest quotes before any work begins.

Licensed & insured

Vetted local pros who treat your home with care.

Easy online booking

Book online in minutes.

What you get

What’s included

Assessment of the opening, including whether nearby framing or plaster lath is affected
Squaring up the damaged area to clean edges so a patch piece fits tight
Wood backing or furring strips installed behind the opening when there's no stud to screw into
A cut piece of matching-thickness drywall set, screwed, and taped at every seam
Multiple coats of joint compound feathered wide and sanded flat
Texture matched and the area primed for paint

Simple & stress-free

How it works

Open it up to solid material

The ragged hole is cut back into a clean square or rectangle, removing any crumbled or water-softened drywall until only sound board remains.

Add backing and set the patch

Where there's no stud behind the opening, we screw in furring strips or a backing board so the new drywall section has something solid to attach to.

Tape, coat, and blend

Every seam is taped and built up in thin compound coats, sanded between each one, then textured and primed so the repair reads as part of the wall.

We can help

Problems we fix

A hole too wide for a store-bought mesh patch to span without sagging or cracking
Damage that goes all the way through with no stud nearby to anchor a patch
Old repairs stacked on top of each other that have started failing again
Crumbling plaster around the edges of a large hole in an older, downtown home
A hole that lands on or near an existing seam, complicating a clean texture match

Good to know

Large Drywall Hole Patch — FAQ

Why can't I just use a big patch kit from the hardware store?

Self-adhesive mesh patches are made for small holes. Once damage gets past a few inches across, the patch has nothing solid to hold onto and will sag or crack — a larger hole needs backing and a proper cut-in piece of drywall.

Will you need to cut the hole bigger before fixing it?

Usually, yes. Squaring the opening up to reach solid framing or clean edges gives the new patch something firm to attach to, which is what makes the repair last.

Is this a one-visit job?

It depends on the size. Compound needs to dry fully between coats, so a larger patch often needs the material to cure before it's sanded and finished, which can mean more than one visit.

My house is an older downtown home with plaster walls — does that change anything?

Yes. Plaster over wood lath cracks and crumbles differently than drywall, and a large opening in it needs different repair materials. We treat plaster as plaster instead of just swapping in sheetrock.

Service area