How to Mount a Heavy Bristle Dartboard Securely to the Wall
A bristle dartboard is heavier than it looks, and one hung on a single drywall screw eventually pulls loose or sits at the wrong height. Solid anchoring and correct measurements make it stay put and play right.
Bristle dartboards have real weight, and the bracket on the back concentrates that load on a small point, so the mount needs to bite into a stud or a strong anchor rather than drywall alone. Beyond holding the weight, the board has a standard playing height and throwing distance that affect how it plays, and the wall around it takes a beating from stray darts. Good installation gets the height and anchoring right and protects the surrounding wall.
How the job is done
- 1
Find a stud or set a strong anchor
A wall stud is located behind the chosen spot so the mounting screw bites into solid framing, or a heavy-duty anchor is set where no stud is available.
- 2
Set the regulation mounting height
The bracket is positioned so the center bullseye lands at the standard playing height measured from the floor, which is what makes the board play correctly.
- 3
Attach the mounting bracket
The board's bracket is fastened firmly into the stud or anchor so the weight is fully supported and the board cannot work loose with repeated play.
- 4
Hang and level the board
The dartboard is seated on the bracket and rotated so it sits level and snug, with the numbering oriented correctly and no wobble against the wall.
- 5
Protect the surrounding wall
A backboard, cabinet, or dartboard surround is added around the board to catch stray darts so they do not pock or dent the wall behind and beside it.
What a pro checks
- Anchors into a stud or heavy-duty anchor, since the board is heavier than it looks
- Sets the bullseye at the standard regulation height from the floor
- Confirms the throwing-line distance so the board plays correctly
- Levels the board and orients the numbering so play is fair
- Adds a surround or backboard to shield the wall from stray darts
- Checks the bracket stays tight, as repeated impact can loosen fasteners
Let AZ Smart Fix handle it
Skip the hassle — our licensed, insured pros do this for you, done right the first time. Book online in minutes.
Frequently asked questions
Can I just hang a dartboard on a drywall screw?
It is not advisable. Bristle boards have real weight that concentrates on the bracket, and a lone drywall screw can pull free over time. Anchoring into a stud or a heavy-duty wall anchor is far more secure.
What height should the dartboard be mounted at?
There is a standard playing height for the center bullseye measured from the floor, paired with a set throwing distance. Mounting at the regulation height is what makes the board play the way it should.
How do I keep stray darts from wrecking my wall?
Install a backboard, surround, or cabinet around the dartboard. These catch off-target throws so the darts hit a protective surface instead of pocking the drywall around the board.
Related guides
Assembling a Heavy-Duty Aquarium Stand Built to Hold a Large Tank
Learn what makes aquarium stand assembly different from regular furniture and how a pro builds a level, fully supported base for a heavy water-filled tank.
Awning Installation: Anchored, Pitched, and Weather-Ready
How a pro installs a retractable or fixed awning: anchoring brackets into framing, setting the pitch for runoff, leveling the projection, and wiring motorized units.
Baby-Proofing a Home: Anchored, Gated, and Genuinely Safe
How a pro baby-proofs a home: anchoring furniture and TVs to studs, mounting hardware safety gates, securing cords and outlets, and covering real hazards.